Titanium Grade 5 is the most widely used titanium alloy. It is characterized by good hot formability and weldability. It is also resistant to salt water, marine atmosphere and a variety of corrosive media temperatures below 300 ° C. Grade 5 titanium alloy is most likely to be accepted by the human body (medical industry).
|Material Design action||3.7164/3.7165|
|Material||Titanium Gr 5|
Titanium Grade 5 is found as most used alloy in many areas again. Thus, for example in:
- Aerospace and Aircraft
- sports equipment
- Medical industry
- chemical Industry
|Temperature Range||High temperature range/Material for wet corrosion|
|ISO-V notch impact toughness at -59°C||across < J/cm²|
|lengthwise < J/cm²|
|Ultimate Tensile Strength||135 KSI (950 MPa)|
|Yield Strength (0.2% offset)||125 KSI (880 MPa)|
As filler for titanium grade 5 titanium bare wire of the same group can be used.
1mm Dia < 400mm Dia Wire , Rods and Bars
0.8mm < 101.6mm Thick Sheets, Plates & coils
ECONOXX.com offers buyers a new and uncomplicated procurement channel, which also includes small quantities and materials in special alloys at favourable conditions.
powered by Hempel